Η φωτογραφια της ημερας
Moderator: Deimitori
- Deimitori
- Posts: 6344
- Joined: Thu Oct 07, 2010 8:10 pm
- Location: Ηλιούπολη και Νέα Μάκρη Αττικής
- Contact:
Εξαιρετική!
Πρίν πέσω στό κρεββάτι γιά ύπνο
βυθίζω ένα κλαράκι στήν καρδιά μου
να γίνει στ΄ όνειρό μου δάσος!
Δημήτρης Ποθητός
http://www.myspace.com/dimitrispothitos
http://skakistiko-kafeneio.blogspot.com
"A long cool smoke to calm a troubled world, an aroma to answer all life's worries - with the addition of rarest Yenidje leaf as the authentic Sobranie touch."
Balkan Sobranie
βυθίζω ένα κλαράκι στήν καρδιά μου
να γίνει στ΄ όνειρό μου δάσος!
Δημήτρης Ποθητός
http://www.myspace.com/dimitrispothitos
http://skakistiko-kafeneio.blogspot.com
"A long cool smoke to calm a troubled world, an aroma to answer all life's worries - with the addition of rarest Yenidje leaf as the authentic Sobranie touch."
Balkan Sobranie
- Σιδ.Σταυρός
- BANNED
- Posts: 11792
- Joined: Wed Jan 28, 2009 9:53 pm
- Location: Ελλάς
- Contact:

Length: 5.05 in./128.27 mm.
Weight: 1.70 oz./48.19 g.
Bowl Height: 2.05 in./52.07 mm.
Chamber Depth: 1.70 in./43.18 mm.
Chamber Diameter: 0.83 in./21.08 mm.
Outside Diameter: 1.66 in./42.16 mm.
Stem Material: Vulcanite
Filter: None
Shape: Bent Dublin
Finish: Smooth
Material: Briar
Country: Japan
'
Πίπες και Καπνοί: http://pipe-smoke.blogspot.com
James Bond 007: «Τα άσυλά μας είναι γεμάτα με ανθρώπους που νομίζουν πως είναι Ναπολέων ή Θεός»
Πίπες και Καπνοί: http://pipe-smoke.blogspot.com

James Bond 007: «Τα άσυλά μας είναι γεμάτα με ανθρώπους που νομίζουν πως είναι Ναπολέων ή Θεός»
- Deimitori
- Posts: 6344
- Joined: Thu Oct 07, 2010 8:10 pm
- Location: Ηλιούπολη και Νέα Μάκρη Αττικής
- Contact:
Αχ, βρε φίλε Σ.Σ. τι μου κάνεις βραδιάτικα...

Πρίν πέσω στό κρεββάτι γιά ύπνο
βυθίζω ένα κλαράκι στήν καρδιά μου
να γίνει στ΄ όνειρό μου δάσος!
Δημήτρης Ποθητός
http://www.myspace.com/dimitrispothitos
http://skakistiko-kafeneio.blogspot.com
"A long cool smoke to calm a troubled world, an aroma to answer all life's worries - with the addition of rarest Yenidje leaf as the authentic Sobranie touch."
Balkan Sobranie
βυθίζω ένα κλαράκι στήν καρδιά μου
να γίνει στ΄ όνειρό μου δάσος!
Δημήτρης Ποθητός
http://www.myspace.com/dimitrispothitos
http://skakistiko-kafeneio.blogspot.com
"A long cool smoke to calm a troubled world, an aroma to answer all life's worries - with the addition of rarest Yenidje leaf as the authentic Sobranie touch."
Balkan Sobranie
Don Carlos LONG CLASSIC CANADIAN PIPE
Dimensions: 7-1/8” long, 1-13/16” tall, 1-3/8" wide, with a 13/16" chamber diameter.
WEIGHT: 34 grams
Dimensions: 7-1/8” long, 1-13/16” tall, 1-3/8" wide, with a 13/16" chamber diameter.
WEIGHT: 34 grams
You do not have the required permissions to view the files attached to this post.
"ΣΟΦΟΣ ΕΙΝΑΙ ΟΠΟΙΟΣ ΞΕΡΕΙ ΤΑ ΧΡΗΣΙΜΑ ΟΧΙ ΤΑ ΠΟΛΛΑ" ΑΙΣΧΥΛΟΣ 525 - 456 π. Χ.
http://forum.pipeclub.gr/viewtopic.php?t=5906
http://forum.pipeclub.gr/viewtopic.php?t=5906
Θα προσθέσω λίγο ιστορία για τις ASHTON για αυτούς που δεν ξέρουν και για αυτούς που ξέρουν να θυμηθούν,να με συγχωρείτε που δεν το μεταφράζω στα ελληνικά,γιατί πρόχθές με τις πορσελάνινες πίπες μου βγήκαν τα μάτια.Η 'αποψή μου στο τέλος.
The Ashton Pipe Story
A man makes his mark
In 1959 a lad of 15 signed on with Alfred Dunhill Ltd as a capstan-lathe operator. Thus began the career in pipe making of one "William Ashton-Taylor", maker of the ASHTON smoking pipe.
Now at age 15 one didn't immediately begin to fashion pipes at Dunhill's. There was a long apprenticeship which involved much sweeping up of pieces of briar and vulcanite, and being "tea boy" to the pipe makers. But Bill showed keen interest in learning the craft. Even before he was permitted to attempt to make pipes at the factory he would bring home rejected bowls and mouthpieces in order to experiment.
Several of the "masters of the bench" noticed Bill's interest, but these were very serious craftsmen, and each had developed processes over the years which they were loathe to share with each other, let alone the newcomer. Finally Harry Saigrott, having recognized Bill's exceptional raw talent, began to share his expertise which was in the art of making the mouthpiece and mating it to the bowl. In time the others came round and Bill was able to learn all the jealously guarded processes that had made the Dunhill pipe the world's finest.
A mark makes a career
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
In the early 1980's Bill strongly felt the need to form his own company in order to return both pipe making and the finished product to the very high standard formerly held. From the time the first pipe bearing his name was made to the present, ASHTON pipes have been manufactured of the best materials and with the utmost skill. And because no one today knows more about the criteria for making fine briar smoking pipes than William Ashton-Taylor, there is no more convincing guarantee for the high quality of ASHTON pipes than the man himself.
R.D. Field played a critical roll in Bill Taylor's transition from Dunhill to the father of Ashton pipes, Bill Ashton-Taylor. Field wrote The Ashton Pipe
Story chronicling this transition.
Due to Bill's unique knowledge of pipe making and the seasoning of briar, he was granted a British patent for his method of manufacturing. This special process results in pipes that are 12- 14% lighter in weight than comparable pipes of other brands. About his handmade pipes Bill states: "For us, both parts of the pipe are equally important- bowl and mouthpiece. In both cases the best material and perfect finishing are essential." Each ASHTON pipe, therefore, offers quality from bowl to bit.
[edit]
Wood makes the pipe
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
The purchase of selected briar wood is the most important pre-condition for the manufacture of high-quality pipes. Thus Bill insisted upon selecting the wood for ASHTON pipes himself. This is a privilege very few pipe makers enjoy today. Bill traveled to Italy twice yearly in order to select and purchase wood. And he has developed such a special relationship with the briar saw mills in that country that only he can command the truly huge pieces of briar that are required for the ASHTON "magnum" pipes so prized by collectors worldwide.
Bill used Calabrian briar for his smooth finished pipes because the wood is both hard and light, coming as it does from a light, sandy soil. Often he took these straight grain plateau blocks and turned them on their sides in order to fashion beautiful cross grain/birds eye pipes which are widely believed to smoke cooler than straight grains.
Briar from Tuscany is used for the ASHTON sandblast finishes, as this type of briar takes on a rich, deep patina after the soft grain is removed by the sand-jet.
[edit]
The method makes the difference
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
The manufacture of ASHTON pipes is based upon an ingenious method first developed in 1915 and improved upon after years of experimentation by William Ashton-Taylor. After the pipe bowls are turned from briar blocks they are heated for eight hours in order that they expand. They are then steeped for an additional eight hours in a mixture composed of three beneficial oils. During this procedure the wood acts like a sponge in soaking up the oils.
After steeping, the oiled bowls are placed on heated brass pegs where they reside for fourteen days. Throughout this period the oil "exudes" from the briar, bringing with it unwanted sap and residue and leaving behind the nut-like flavor for which ASHTON pipes have become renowned.
The torch is passed
Recent Army Mount, Courtesy Chip Fadeley
William Ashton-Taylor passed away on September 16, 2009. Jimmy Craig is the only person we are aware of that carries on William's traditions in crafting pipes the “Ashton” way and this can only be verified by you, the pipe community as you experience his work. It is hoped that Jimmy will continue William's legacy, as the art of crafting smoking pipes is now a very rare skill indeed. Ashton-Taylor Pipes hopes that you agree that the quality of Jimmy’s work is indeed that of William, for William was very proud of the work that Jimmy was producing for him in 2008 and 2009.
Λοιπόν τώρα έχουμε και λέμε, είμαι λάτρης της αγγλικής σχολής αν και επιθυμώ ελληνική,μπαίνω στο θέμα κατευθείαν.
Αργύρη καλό το πιπόνι σε μήκος σχήμα αλλά μπάζει για ASHTON των 300-400 $, δεν επιτρέπεται σε shank-επιστόμιο αυτό,δεν επιτρέπεται αμμοβολή και να ξεφεύγει στην εσωτερική κοιλότητα, εκεί φαίνεται ο μάστορας και εν΄κατακλείδι Οι ASHTON ήταν κάποτε, απο τότε που τις ανέλαβε ο GRAIG τις θυσίασε στο όνομα της εμπορικότητας και εκμεταλλεύτηκε το όνομα του William,έχω εντρυφήσει στις συγκεκριμένες
πίπες και δεν είναι ίδιες όπως οι παλιές, είχα 2 ASHTON και η μόνη που άξίζε και έδείχνε βαρύτητα ηταν μία panel, το μπιλιάρδο που είχα ήταν κλάφτα και η σύνδεση του επιστομίου και η ίσια γραμμή (τονίζω και πάλι για ashton) τις έδωσα στο e-bay σε καλές τιμές,γενικά προσπαθεί να κλέψει πίτα απο τις Dunhill και γενικά έχουν καλή εμπορική αξία στο e-bay και στους Αμερικάνους που προτιμούν γενικά βαρύγδουπες μεγάλες πίπες, ο William άφησε καλή μαγιά και το καλό management το συνέχισε αυτό,πάντως για τα λεφτά που ζητάει και την βαρύτητα της ιστορίας που έχουν οι πίπες, οι νεώτερες δεν είναι αυτές που θα έπρεπε,βέβαια υπάρχουν και οι εξαιρέσεις, αλλά για μένα δεν θα είναι στο roster μου πλέον.Αυτά τα λίγα-πολλά.
Νεκτάριος
The Ashton Pipe Story
A man makes his mark
In 1959 a lad of 15 signed on with Alfred Dunhill Ltd as a capstan-lathe operator. Thus began the career in pipe making of one "William Ashton-Taylor", maker of the ASHTON smoking pipe.
Now at age 15 one didn't immediately begin to fashion pipes at Dunhill's. There was a long apprenticeship which involved much sweeping up of pieces of briar and vulcanite, and being "tea boy" to the pipe makers. But Bill showed keen interest in learning the craft. Even before he was permitted to attempt to make pipes at the factory he would bring home rejected bowls and mouthpieces in order to experiment.
Several of the "masters of the bench" noticed Bill's interest, but these were very serious craftsmen, and each had developed processes over the years which they were loathe to share with each other, let alone the newcomer. Finally Harry Saigrott, having recognized Bill's exceptional raw talent, began to share his expertise which was in the art of making the mouthpiece and mating it to the bowl. In time the others came round and Bill was able to learn all the jealously guarded processes that had made the Dunhill pipe the world's finest.
A mark makes a career
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
In the early 1980's Bill strongly felt the need to form his own company in order to return both pipe making and the finished product to the very high standard formerly held. From the time the first pipe bearing his name was made to the present, ASHTON pipes have been manufactured of the best materials and with the utmost skill. And because no one today knows more about the criteria for making fine briar smoking pipes than William Ashton-Taylor, there is no more convincing guarantee for the high quality of ASHTON pipes than the man himself.
R.D. Field played a critical roll in Bill Taylor's transition from Dunhill to the father of Ashton pipes, Bill Ashton-Taylor. Field wrote The Ashton Pipe
Story chronicling this transition.
Due to Bill's unique knowledge of pipe making and the seasoning of briar, he was granted a British patent for his method of manufacturing. This special process results in pipes that are 12- 14% lighter in weight than comparable pipes of other brands. About his handmade pipes Bill states: "For us, both parts of the pipe are equally important- bowl and mouthpiece. In both cases the best material and perfect finishing are essential." Each ASHTON pipe, therefore, offers quality from bowl to bit.
[edit]
Wood makes the pipe
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
The purchase of selected briar wood is the most important pre-condition for the manufacture of high-quality pipes. Thus Bill insisted upon selecting the wood for ASHTON pipes himself. This is a privilege very few pipe makers enjoy today. Bill traveled to Italy twice yearly in order to select and purchase wood. And he has developed such a special relationship with the briar saw mills in that country that only he can command the truly huge pieces of briar that are required for the ASHTON "magnum" pipes so prized by collectors worldwide.
Bill used Calabrian briar for his smooth finished pipes because the wood is both hard and light, coming as it does from a light, sandy soil. Often he took these straight grain plateau blocks and turned them on their sides in order to fashion beautiful cross grain/birds eye pipes which are widely believed to smoke cooler than straight grains.
Briar from Tuscany is used for the ASHTON sandblast finishes, as this type of briar takes on a rich, deep patina after the soft grain is removed by the sand-jet.
[edit]
The method makes the difference
Image Courtesy of pipes2smoke.com
Image Courtesy of pipes2smoke.com
The manufacture of ASHTON pipes is based upon an ingenious method first developed in 1915 and improved upon after years of experimentation by William Ashton-Taylor. After the pipe bowls are turned from briar blocks they are heated for eight hours in order that they expand. They are then steeped for an additional eight hours in a mixture composed of three beneficial oils. During this procedure the wood acts like a sponge in soaking up the oils.
After steeping, the oiled bowls are placed on heated brass pegs where they reside for fourteen days. Throughout this period the oil "exudes" from the briar, bringing with it unwanted sap and residue and leaving behind the nut-like flavor for which ASHTON pipes have become renowned.
The torch is passed
Recent Army Mount, Courtesy Chip Fadeley
William Ashton-Taylor passed away on September 16, 2009. Jimmy Craig is the only person we are aware of that carries on William's traditions in crafting pipes the “Ashton” way and this can only be verified by you, the pipe community as you experience his work. It is hoped that Jimmy will continue William's legacy, as the art of crafting smoking pipes is now a very rare skill indeed. Ashton-Taylor Pipes hopes that you agree that the quality of Jimmy’s work is indeed that of William, for William was very proud of the work that Jimmy was producing for him in 2008 and 2009.
Λοιπόν τώρα έχουμε και λέμε, είμαι λάτρης της αγγλικής σχολής αν και επιθυμώ ελληνική,μπαίνω στο θέμα κατευθείαν.
Αργύρη καλό το πιπόνι σε μήκος σχήμα αλλά μπάζει για ASHTON των 300-400 $, δεν επιτρέπεται σε shank-επιστόμιο αυτό,δεν επιτρέπεται αμμοβολή και να ξεφεύγει στην εσωτερική κοιλότητα, εκεί φαίνεται ο μάστορας και εν΄κατακλείδι Οι ASHTON ήταν κάποτε, απο τότε που τις ανέλαβε ο GRAIG τις θυσίασε στο όνομα της εμπορικότητας και εκμεταλλεύτηκε το όνομα του William,έχω εντρυφήσει στις συγκεκριμένες
πίπες και δεν είναι ίδιες όπως οι παλιές, είχα 2 ASHTON και η μόνη που άξίζε και έδείχνε βαρύτητα ηταν μία panel, το μπιλιάρδο που είχα ήταν κλάφτα και η σύνδεση του επιστομίου και η ίσια γραμμή (τονίζω και πάλι για ashton) τις έδωσα στο e-bay σε καλές τιμές,γενικά προσπαθεί να κλέψει πίτα απο τις Dunhill και γενικά έχουν καλή εμπορική αξία στο e-bay και στους Αμερικάνους που προτιμούν γενικά βαρύγδουπες μεγάλες πίπες, ο William άφησε καλή μαγιά και το καλό management το συνέχισε αυτό,πάντως για τα λεφτά που ζητάει και την βαρύτητα της ιστορίας που έχουν οι πίπες, οι νεώτερες δεν είναι αυτές που θα έπρεπε,βέβαια υπάρχουν και οι εξαιρέσεις, αλλά για μένα δεν θα είναι στο roster μου πλέον.Αυτά τα λίγα-πολλά.
Νεκτάριος
You do not have the required permissions to view the files attached to this post.
"ΣΟΦΟΣ ΕΙΝΑΙ ΟΠΟΙΟΣ ΞΕΡΕΙ ΤΑ ΧΡΗΣΙΜΑ ΟΧΙ ΤΑ ΠΟΛΛΑ" ΑΙΣΧΥΛΟΣ 525 - 456 π. Χ.
http://forum.pipeclub.gr/viewtopic.php?t=5906
http://forum.pipeclub.gr/viewtopic.php?t=5906
Καλα οι Aston ποτε δεν ηταν τελεια σχεδιασμενα κομματια ακομα και στα καλυτερα τους, παρολα αυτα ηταν τελειες πιπες, που ακομα βγαινουν μερικες τετοιες, αλλα τις πετυχαινω μονο σε κινεζικα μαγαζια.
Εγω βρισκω εξαιρετικο(σαν ιδεα και εκτελεση) την επιστροφη στις pat no. shell αμμοβολες της Dunhill, που μαζι με το περιφημο oil curing τον απογειωσαν στις προτιμησεις των καπνιστων.
Ο Taylor απο τοτε στο να παρει μεριδιο απο την πιτα των καπνιστων της Dunhill στοχευε, και το καταφερε.
Για τις Magnum τα εχω γραψει στο blog μου, αμερικανιες...
Υποτιθεται οτι ακομα και σημερα οι Ashton κανουν κορυφαιο καπνισμα, εγω ειχα μια κατασκευασμενη στις αρχες του 90, καπνιζε εξαιρετικα, αλλα δοθηκε για αλλους λογους.
Οταν βρω την ευκαιρια θα παρω μια καινουρια XX ετσι για να δω τι συμβαινει με τις καινουριες...δυστυχως ενα σωστο αγγλικο billard κοστιζει πια περισσοτερο απο lovat, canadian κτλ(η ευτυχως;)
Η συγκεκριμενη εχει θεματα, αλλα λιγες Ashton δεν εχουν...
Εγω βρισκω εξαιρετικο(σαν ιδεα και εκτελεση) την επιστροφη στις pat no. shell αμμοβολες της Dunhill, που μαζι με το περιφημο oil curing τον απογειωσαν στις προτιμησεις των καπνιστων.
Ο Taylor απο τοτε στο να παρει μεριδιο απο την πιτα των καπνιστων της Dunhill στοχευε, και το καταφερε.
Για τις Magnum τα εχω γραψει στο blog μου, αμερικανιες...
Υποτιθεται οτι ακομα και σημερα οι Ashton κανουν κορυφαιο καπνισμα, εγω ειχα μια κατασκευασμενη στις αρχες του 90, καπνιζε εξαιρετικα, αλλα δοθηκε για αλλους λογους.
Οταν βρω την ευκαιρια θα παρω μια καινουρια XX ετσι για να δω τι συμβαινει με τις καινουριες...δυστυχως ενα σωστο αγγλικο billard κοστιζει πια περισσοτερο απο lovat, canadian κτλ(η ευτυχως;)
Η συγκεκριμενη εχει θεματα, αλλα λιγες Ashton δεν εχουν...
